Materials In Vacuum
Kurt Feltenberger
(01 Nov 2017 02:03 UTC)
|
Re: [TML] Materials In Vacuum
Tim
(01 Nov 2017 03:34 UTC)
|
Re: [TML] Materials In Vacuum
Grimmund
(01 Nov 2017 13:55 UTC)
|
Re: [TML] Materials In Vacuum
Bruce Johnson
(01 Nov 2017 16:04 UTC)
|
Re: [TML] Materials In Vacuum
C. Berry
(01 Nov 2017 17:51 UTC)
|
Re: [TML] Materials In Vacuum
C. Berry
(01 Nov 2017 21:27 UTC)
|
Re: [TML] Materials In Vacuum Kelly St. Clair (01 Nov 2017 23:49 UTC)
|
Re: [TML] Materials In Vacuum
Richard Aiken
(02 Nov 2017 05:15 UTC)
|
Re: [TML] Materials In Vacuum
Kelly St. Clair
(02 Nov 2017 06:52 UTC)
|
Re: [TML] Materials In Vacuum
C. Berry
(02 Nov 2017 19:52 UTC)
|
Re: [TML] Materials In Vacuum
C. Berry
(02 Nov 2017 19:48 UTC)
|
Re: [TML] Materials In Vacuum
Rupert Boleyn
(02 Nov 2017 23:27 UTC)
|
Re: [TML] Materials In Vacuum
Rupert Boleyn
(02 Nov 2017 23:23 UTC)
|
Re: [TML] Materials In Vacuum
C. Berry
(02 Nov 2017 23:48 UTC)
|
Re: [TML] Materials In Vacuum
shadow@xxxxxx
(04 Nov 2017 21:38 UTC)
|
Re: [TML] Materials In Vacuum
Bruce Johnson
(06 Nov 2017 14:34 UTC)
|
Re: [TML] Materials In Vacuum
Grimmund
(08 Nov 2017 19:41 UTC)
|
Re: [TML] Materials In Vacuum
shadow@xxxxxx
(09 Nov 2017 11:37 UTC)
|
Re: [TML] Materials In Vacuum
shadow@xxxxxx
(04 Nov 2017 21:38 UTC)
|
On 11/1/2017 2:26 PM, C. Berry wrote: > You'd probably want to leave the ship slowly rotating, to heat it evenly > (time-averaged). You'd want the axis of rotation perpendicular to the > incident starlight, which would require active adjustments to maintain > over the course of an orbit around the star. I imagine a tug visiting > every few months to do this to all the ships in a given boneyard. The > tug crews might call it a torque tour. Can't you just point the axis and/or nose straight "up" or "down"? No adjustment required, assuming a zero-inclination orbit, except for precession or other drift. Pity the hulls probably wouldn't be close enough for naked-eye observation; spoils the visual of a dozen starships all slowly rotating like kebab rotisseries. -- --------------- Kelly St. Clair xxxxxx@efn.org