On October 10, 2019 at 5:21 AM "Phil Pugliese (via tml list)" <xxxxxx@simplelists.com> wrote:

 

That may have been the 'question' per se but here is the full statement ;

"Hello all,

Back in when I picked up Traveller my impression, which was reinforced by the GM, has been that a J4 drive has a maximum range of four parsecs regardless of the hull size that it is installed in.

Can a J4 drive built for a 400 ton hull allow a 300 ton hull to make a five parsec jump?

Tom Rux"

So, OK, the answer to the 'question' is 'no' wrt the specified details. 

However, I was primarily addressing the inaccuracy of the previous sentence which was & is clearly wrong.

So, while in the specific example of a J4 initially installed in a 400 Dt hull will not allow a 300 Dt hull to achieve J5, it is quite possible to raise the J capability of LBB 2 J-drives by installing them in smaller Dt hulls.

Hence, a J4 drive does NOT have "a max range of four parsecs regardless of the hull size"  & that long-ago GM was dead-wrong.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

On Wednesday, October 9, 2019, 08:54:47 PM MST, Thomas RUX <xxxxxx@comcast.net> wrote:

Hello Phil,

The question was: Can a J4 drive built for a 400 ton hull allow a 300 ton hull to make a five parsec jump?

CT LBB 2 Building Ships pages 20-21: "1. Custom hulls with mass displacements other than the hull sizes shown on the drive potential table are treated as the next larger size. The maximum hull size possible in these rules is 5000 tons."

In CT LBB 2 a J4 drive sized for a 400 ton hull will not allow a custom 300 ton hull to make a five parsec jump.

A CT LBB 2 600 ton hull with a J4 drive can use drive types M, N, or P. Using either a 600 ton J4 type M or type N drive appears to be able to allow 400 ton hull to make J6. The M type J4 drive requires 65 tons of hull space and the type N use 70. The two jump drives exceeds the 400 tons available Engineering space of 50 tons by 15 and 20 tons. A 400 ton hull J6 drive requires 0.1 x 400 x 6 = 40 x 6 = 240 tons reducing the Main Compartment's 350 tons to 110 tons and stealing 15 tons leaves 95 tons. Installing the smallest Power Plant  4 is Type H and requires 25 tons of space 95 - 25 = 70 tons of unused space. The power plant requires 60 tons of fuel which leaves 70 - 60 = 10 tons of hull space. A 400 ton hull has a 20 ton bridge and requires a Model/4 computer of 4 tons 10 - 24 = -14.

The use of a J4 drive built for a 600 ton hull on a 400 ton hull will not jump 6 parsecs there is not enough room to fit the required components.

Tom Rux